Enable Syslog on Port 514 and Allow via Firewall (Ubuntu)

Step 1: Install rsyslog
1. Open terminal.
2. Run the following commands:

sudo apt updatesudo apt install rsyslog -ysudo systemctl enable rsyslogsudo systemctl start rsyslog

Step 2: Enable Syslog Reception on Port 514
1.Open the rsyslog configuration file:

sudo nano /etc/rsyslog.conf

2. Find and uncomment or add these lines:

module(load="imudp")input(type="imudp" port="514")module(load="imtcp")input(type="imtcp" port="514")

3.Save and exit (Ctrl+X, then Y, then Enter).

Step 3: Restart rsyslog

sudo systemctl restart rsyslog

Step 4: Allow Port 514 in UFW Firewall
1. Run the following:

sudo ufw allow 514/udpsudo ufw allow 514/tcpsudo ufw reload

2. Check status:

sudo ufw status

Step 5: Confirm Port is Listening

sudo ss -tulnp | grep 514

Or if netstat is available:

sudo netstat -tulnp | grep 514

Step 6: Optional - Test from Remote Client
From another machine:

logger -n <server-ip-address> -P 514 "Test syslog message"

Then on the Ubuntu server:

sudo tail -f /var/log/syslog

Step 7: End-to-End Connectivity Test (Ping)
From Azure VM (log collector), test connectivity to Cisco Meraki and Palo Alto devices.

Ping Cisco Meraki:

ping <meraki_ip_address>

Ping Palo Alto:

ping <palo_alto_ip_address>

If ping is successful, you'll see replies with time. If not, verify:

• NSG and UFW rules in Azure

• On-prem firewall rules

• IP reachability and routing

If you need further assistance, kindly contact our support at support@cytechint.com for prompt assistance and guidance.